Device Control Block (Joystick) - Sony MVS-8000SF User Manual

Device Control Block (Joystick)

The joystick type device control block is
used for three-dimensional transform
operations using a DME.
3 MENU button
a Operating buttons
The functions of these buttons are
equivalent to the functions in three-
dimensional transform operation mode of
the operating buttons of the trackball type
device control block.
Notes
To select a required DME channel, use the
region selection buttons in the numeric
keypad control block.
Use of the [SHIFT] button
Pressing a button in the device control
block while holding down the [SHIFT]
button enables the shifted function of the
button. Also, pressing a button in the
keyframe control block while holding down
1 Operating buttons
the [SHIFT] button enables the shifted
function of the button.
About the [CLR WORK BUFR] (clear
work buffer) button
When [M/E-1] or [P/P] is selected along in
the numeric region selection buttons of the
keypad control block, press this button
twice in rapid succession to reset all
parameters of the selected M/E or P/P to
their initial values. When a DME channel is
selected in the region selection buttons, the
operation is the same as when using a
trackball type device control block in the
three-dimensional transform operation
mode (see page 79).
Names and Functions of Parts of the Control Panel
2 Joystick
61