Sony MLS-X1 User Manual page 114

Executing an independent key transition
(key fader control block)
You can execute an independent key transition for a key
assigned to a key delegation button.
For details about assigning key delegation buttons, see
"Assigning Control Panel Buttons" (page 402).
To insert/remove a key instantaneously
Press the [KEY ON] button.
Note
The [KEY ON] button label indicates the key assigned to
the key delegation button.
To insert/remove a key with the preset transition
type and transition rate
Press the [AUTO TRANS] button for the corresponding
key.
During the transition execution, the button is lit amber
and goes off when the transition is completed.
Notes
• You can change this so that during the execution of the
transition, the button is lit green and when the transition
is completed it is lit red if on-air or lit amber if not on-
air.
For details about settings, see "Setting the independent
key transition, auto transition execution button
display" (page 417).
• When a cut is selected as the transition type, the key is
inserted/removed instantaneously.
To insert/remove a key manually with the preset
transition type
Operate using the fader lever.
Note
You can set the key which is the target of fader lever
operation.
For details about setting the fader lever, see "Assigning
Control Panel Buttons" (page 402).
Executing an independent key transition
(menu)
This section describes the M/E-1 key 1 menu as an
example.
1
Open the Home > M/E-1 > Key1 > Key Snapshot
menu (11101.71).
2
Execute a transition.
To insert/remove a key instantaneously
Press the [KEY ON] button.
To insert/remove a key with the preset transition
type and transition rate
Press the [KEY TRANS] button.
Note
When a cut is selected as the transition type, the key
is inserted/removed instantaneously.
114