Edge Effects; Setting A Border; Setting A Crop - Sony MLS-X1 User Manual

Edge Effects

This section describes the menu for DME channel 1 as an
example.

Setting a Border

1
Open the Home > DME > Channel1 > Edge > Border/
Crop menu (15101.21).
2
Set the [Border] button to the on state and set the
following parameters.
No. Parameter
1-1 H
1-2 V
1-3 All
1-5 Density
2-1 Top
2-2 Left
2-3 Right
2-4 Bottom
2-5 Density
a) The [Density] parameter in numbers 1-5 and 2-5 are common.
3
In the [Border Fill] group, select a signal to insert in
the border.
Flat Color: Single color
Ext Video: External input (Ext In) signal
When the [Flat Color] button is selected, set the
following parameters.
No. Parameter
1 Luminance
2 Saturation
3 Hue
To soften the border
Set the [Border Soft] button to the on state and set the
following parameter.
No. Parameter Adjustment
1 Soft Softness of inner edge of border
Adjustment
Simultaneous adjustment of
border width of left and right
edges
Simultaneous adjustment of
border width of top and
bottom edges
Simultaneous adjustment of
border width of top, bottom,
left, and right edges
a)
Density of border
Border width of top edge
Border width of left edge
Border width of right edge
Border width of bottom edge
a)
Density of border
Adjustment
Luminance
Saturation
Hue

Setting a Crop

1
Open the Home > DME > Channel1 > Edge > Border/
Crop menu (15101.21).
2
Set the [Crop] button to the on state and set the
following parameters.
No. Parameter
1-1 H
1-2 V
1-3 All
2-1 Top
2-2 Left
2-3 Right
2-4 Bottom
a) The entered numeric value is automatically a positive value for the
right and top edges and a negative value for the left and bottom
edges.
To soften the edges
Set the [Edge Soft] button to the on state and set the
following parameter.
No. Parameter
1 Soft
Linking the crop areas when inverting
1
Open the Home > DME > Channel1 > Edge > Border/
Crop menu (15101.21).
2
In the [Invert/Crop Process] group, select the
operation when inverting.
Crop -> Invert: With the axis of symmetry at the
center of the input image, invert both the central
image and the crop area horizontally and
vertically around the axis of symmetry. The order
of effect application for the input image is Crop
and then Invert.
Invert -> Crop: With the axis of symmetry at the
center of the input image, invert only the central
image horizontally and vertically around the axis
of symmetry. The order of effect application is
Invert and then Crop.
205
Adjustment
Simultaneous adjustment of
crop of left and right edges
Simultaneous adjustment of
crop of top and bottom edges
Simultaneous adjustment of
crop of top, bottom, left, and
a)
right edges
Crop of top edge
Crop of left edge
Crop of right edge
Crop of bottom edge
Adjustment
Edge softness
a)
a)