Sony MLS-X1 User Manual page 123

2
Set the [Key Active] button to the on state and set the
following parameters.
No. Parameter
1 Clip
2 Gain
3 Hue
4 Density
5 Filter
a) No filter is applied when set to "1". The larger the value, the
stronger the filtering applied.
Adjusting the window
1
Open the Home > M/E-1 > Key1 > Type > Chroma
Adjust menu (11101.12).
2
Set the [Window] button to the on state and set the
following parameters.
No. Parameter
1 Crop
2 Angle
Adjusting the Y balance
1
Open the Home > M/E-1 > Key1 > Type > Chroma
Adjust menu (11101.12).
2
Set the [Y Balance] button to the on state and set the
following parameters.
No. Parameter
1 Clip
2 Gain
3 Luminance
Adjusting the shadow
Note
When the system signal format is 2160P, the shadow
function cannot be set.
1
Open the Home > M/E-1 > Key1 > Type > Chroma
Adjust menu (11101.12).
2
Set the [Shadow] button to the on state and set the
following parameters.
Adjustment
Reference level for key signal
generation
Key gain
Key hue
Key density
a)
Filter (1 to 9)
Adjustment
Vertex crop level
Opening angle
Adjustment
Reference level for key signal
generation
Key gain
Key luminance
No. Parameter
1 Luminance
2 Gain
3 Density
4 Soft
Adjusting color cancel
1
Open the Home > M/E-1 > Key1 > Type > Chroma
Adjust menu (11101.12).
2
Set the [Color Cancel] button in the [Color Cancel]
group to the on state and set the following parameters.
No. Parameter
1 Luminance
2 Saturation
3 Hue
5 Filter
a) No filter is applied when set to "1". The larger the value, the
stronger the filtering applied.
To adjust the color cancel key
Set the key signal for color cancel.
1
Set the [Cancel Key] button in the [Color Cancel]
group to the on state and set the following parameters.
No. Parameter
1 Clip
2 Gain
2
Set the [Key Position] button in the [Color Cancel]
group to the on state and set the following parameters.
Adjust the position of the color cancel key.
No. Parameter
1 H Phase
2 Left
3 Right
3
Set the [Window] button in the [Color Cancel] group
to the on state and set the following parameters.
Adjust the detection range of the color cancel key.
No. Parameter
1 Crop
2 Angle
123
Adjustment
Key luminance
Key gain
Key density
Softness of shadow
Adjustment
Luminance
Saturation
Hue
a)
Filter (1 to 9)
Adjustment
Reference level for key signal
generation
Key gain
Adjustment
Simultaneous adjustment of
position of left and right
edges
Position of left edge
Position of right edge
Adjustment
Vertex crop level
Opening angle