Sony MLS-X1 User Manual page 244

No. Parameter
2 Soft
5 Pattern
a) Linked to the pattern number selected using the [Mix Pattern
Select] button.
3
Press the [Mix Pattern Select] button.
A pattern selection window appears.
4
Set the button for the target pattern to the on state.
Note
Dedicated patterns 1 to 24 are the same as standard
wipe patterns 1 to 24.
5
Press [OK].
6
Press the [Color 1] button and set color 1 using the
following parameters.
No. Parameter
1 Luminance
2 Saturation
3 Hue
Note
The [Color 1] button parameters are common to the
[Flat Color] buttons in the [Matte] group.
7
Press the [Color 2] button and set color 2 using the
following parameters.
No. Parameter
1 Luminance
2 Saturation
3 Hue
To swap color 1 and color 2 in a color mix
Set the [Color Invert] button to the on state.
To set the pattern position (Position)
Set the [Position] button to the on state and set the
following parameters.
No. Parameter Adjustment
1 Position H Horizontal position
• Negative values move left.
• Positive values move right.
2 Position V Vertical position
• Negative values move down.
• Positive values move up.
Adjustment
Softness of the pattern
contour
a)
Pattern number
Adjustment
Luminance
Saturation
Hue
Adjustment
Luminance
Saturation
Hue
To replicate a pattern (Multi)
You can replicate a pattern horizontally, vertically, or
both up to 63 times.
For details about pattern layouts, see "Replicating a wipe
pattern (Multi)" (page 159).
Set the [Multi] button to the on state and set the following
parameters.
No. Parameter
1 H Multi
2 V Multi
3 Invert Type
To set the aspect ratio of a pattern (Aspect)
Set the [Aspect] button to the on state and set the
following parameter.
No. Parameter
1 Aspect
To rotate a pattern (Rotation)
In the [Rotation] group, select a rotation type.
Angle: Incline a pattern at a fixed angle.
Speed: Rotate a pattern at a fixed speed.
When the [Angle] button is selected, set the following
parameter.
No. Parameter
1 Angle
When the [Speed] button is selected, set the following
parameter.
No. Parameter
1 Speed
244
Adjustment
Number of repetitions of pattern
horizontally
Number of repetitions of pattern
vertically
Pattern layout (1 to 4)
Adjustment
Aspect ratio
• Negative values expand
vertically.
• Positive values expand
horizontally.
Adjustment
Inclination angle of pattern
• A value of –100.00 corresponds
to a rotation of one turn
counterclockwise.
• A value of +100.00
corresponds to a rotation of one
turn clockwise.
• A value of 0.00 corresponds to
no rotation.
Adjustment
Rotation speed of pattern
• A value of –100.00 corresponds
to 1 revolution/second
counterclockwise rotation.
• A value of +100.00
corresponds to 1 revolution/
second clockwise rotation.
• A value of 0.00 corresponds to
no rotation (stationary).