Applying Special Effects (Edge Effects); Border Settings - Sony MVS-8000X SystemMVS-7000X System User Manual

Applying Special Effects
(Edge Effects)

Border Settings

Adding a border
1
In the DME menu, select VF1 'Edge' and HF1
'Border/Crop.'
The Border/Crop menu appears.
2
Press [Border], turning it on.
3
Set the parameters.
The valid ranges of the parameter values depend on the
combination of signal format (SD/HD) and aspect
ratio (4:3/16:9) selected in the system, as follows.
4:3 mode
Parameter group [1/2]
Knob Parameter Adjustment
1 H Border width
on left and
right sides
2 V Border width
on top and
bottom sides
3 All Border width
on all sides
5 Density
Border
density
Parameter group [2/2]
Knob Parameter Adjustment
1 Top Border width
on top side
2 Left Border width
on left side
3 Right
Border width
on right side
4 Bottom Border width
on bottom
side
5 Density
Border
density
Setting values
Left value shown
Top value shown
Setting the border color
Left value shown The operation differs depending on the DME used (MVE-
8000A, MVE-9000 or MKS-7470X/7471X).
0.00 to 100.00
When the MVE-8000A is used
Press [Border Color], turning it on, and set the following
parameters.
Setting values
Knob Parameter Adjustment
–6.00 to +6.00 (SD)
1
–18.00 to +18.00
2
(HD)
3
–8.00 to +8.00 (SD)
–24.00 to +24.00
When the MVE-9000 or MKS-7470X/7471X is used
(HD)
Use the buttons in the <Border Fill> group to select the
–8.00 to +8.00 (SD)
signal to insert in the border.
–24.00 to +24.00
Flat Color: single color
(HD)
Mix Color: mix color signal set in the Color Mix menu
–6.00 to +6.00 (SD)
–18.00 to +18.00
Ext Video: an external video signal input to the Ext IN
(HD)
0.00 to 100.00
If Flat Color is selected, adjust the following parameters.
Knob Parameter Adjustment
1
16:9 mode
Parameter group [1/2]
Knob Parameter Adjustment
1 H Border width
on left and
right sides
2 V Border width
on top and
bottom sides
3 All Border width
on all sides
5 Density Border
density
Parameter group [2/2]
Knob Parameter Adjustment
1 Top Border width
on top side
2 Left Border width
on left side
3 Right Border width
on right side
4 Bottom
Border width
on bottom
side
5 Density Border
density
Luminance Luminance
Saturation Saturation
Hue Hue
(see page 302)
connector
Luminance Luminance

Applying Special Effects (Edge Effects)

Setting values
Left value shown
Top value shown
Left value shown
0.00 to 100.00
Setting values
–4.50 to +4.50 (SD)
–18.00 to +18.00
(HD)
–8.00 to +8.00 (SD)
–32.00 to +32.00
(HD)
–8.00 to +8.00 (SD)
–32.00 to +32.00
(HD)
–4.50 to +4.50 (SD)
–18.00 to +18.00
(HD)
0.00 to 100.00
Setting values
0.00 to 100.00
0.00 to 100.00
359.99 to 0.00
Setting values
0.00 to 100.00
289