How To Remove The Dvd-Rom Cable - Sun Microsystems Sun Fire V440 Parts Installation And Removal Manual

What Next
Complete these tasks:
"How to Install the PCI Fan Tray" on page 70
"How to Install the Top Cover" on page 35
"How to Slide the System Into the Cabinet" on page 32
"How to Power On the System" on page 19

How to Remove the DVD-ROM Cable

Before You Begin
Complete these tasks:
"How to Power Off the System" on page 23
"How to Slide the System Out of the Cabinet" on page 29
"How to Avoid Electrostatic Discharge" on page 44
"How to Remove the Top Cover" on page 34
"How to Remove the PCI Fan Tray" on page 67
"How to Remove the CPU Fan Tray" on page 73
What to Do
1. Disconnect the P1 cable end at P1 on the motherboard.
Lift the locking levers on the sides of the connector to release the cable end.
152 Sun Fire V440 Server Parts Installation and Removal Guide • July 2003