Sun Microsystems Sun Fire V440 Parts Installation And Removal Manual page 137

2. Insert the SCC reader into the system.
a. Insert the Power button through its hole in the chassis.
b. Align the holes in the SCC reader with the corresponding mounting posts on
the chassis.
3. Snap the SCC reader into place.
Press down on the front corners, then on the back corners of the SCC reader.
4. Connect the cables to the SCC reader.
Press the cable ends into the corresponding connectors.
a. Connect the system control keyswitch cable at J2.
b. Connect the connector board power cable at J18.
5. Connect the AC power cords to the back of the system.
J18
Chapter 6 Servicing Miscellaneous Components
J2
125