Sun Microsystems Sun Fire V440 Parts Installation And Removal Manual page 147

5. Slide the connector board toward the back of the system to connect the board to
the SCSI backplane.
Push the connector board into the SCSI backplane until it is secure.
6. Tighten the Phillips No. 2 captive screw to secure the connector board to the
chassis.
7. Install the disk drives.
a. Firmly press the center of the disk drive handle toward the disk drive until the
latch closes, securing the disk drive in place.
b. Repeat Step a for each disk drive.
8. Connect the AC power cords to the back of the system.
What Next
To reassemble the system, complete these tasks:
"How to Install the PCI Fan Tray" on page 70
"How to Install the Top Cover" on page 35
"How to Slide the System Into the Cabinet" on page 32
"How to Power On the System" on page 19
Chapter 6 Servicing Miscellaneous Components 135