How To Remove The Connector Board Power Cable - Sun Microsystems Sun Fire V440 Parts Installation And Removal Manual

How to Remove the Connector Board
Power Cable
Before You Begin
Complete these tasks:
"How to Power Off the System" on page 23
"How to Slide the System Out of the Cabinet" on page 29
"How to Avoid Electrostatic Discharge" on page 44
"How to Remove the Top Cover" on page 34
What to Do
Caution – The system supplies power to the connector board power cable even
when the system is powered off. To avoid personal injury or damage to the system,
you must disconnect the AC power cords before servicing the connector board
power cable.
1. Disconnect the AC power cords from the back of the system.
146 Sun Fire V440 Server Parts Installation and Removal Guide • July 2003