Sun Microsystems Sun Fire V440 Parts Installation And Removal Manual page 50

5. Extend the system from the cabinet, and then position one person on each side of
the system, facing the system glides.
When you are both in position, verify that your helper understands what to do with
the system after you release the server and remove it. Also agree on a route to
follow, and visually inspect it for potential safety hazards (for example, cables on the
floor, other people working in the vicinity, and so on).
6. Locate the flat spring catches.
Each person should visually locate one of the two flat spring catches that release the
system from the slide assemblies. One catch is attached to each inner glide.
7. Prepare to remove the system.
Each person should place one hand on the flat spring catch and the other hand
beneath the system, palm up, ready to support the weight of the system.
8. Simultaneously press in on both flat spring catches to release them, and then slide
the system out of the slide assemblies.
Each person presses one flat spring catch and helps slide the system free of the slide
assemblies, supporting the weight of the system with both hands as the system
slides free of the cabinet.
9. Set the system on a workbench or other stable surface.
38 Sun Fire V440 Server Parts Installation and Removal Guide • July 2003
Catch