Sun Microsystems Sun Fire V440 Parts Installation And Removal Manual page 106

3. Remove the Phillips No. 1 screw securing the card to the system back panel.
4. Pull the PCI card from its slot.
Hold the card by the faceplate and its opposite edge. Pull up while rocking the card
from end to end until it is freed from its slot.
Caution – Do not apply excessive force to one end or one side of the card. Doing so
could damage the card.
5. Place the PCI card on an antistatic mat.
6. If you are not replacing the PCI card, install a PCI filler panel.
The PCI filler panel prevents debris from entering the system and ensures proper
cooling.
a. Slide the filler panel into the appropriate slot.
b. Replace the Phillips No. 1 screw that secures the filler panel to the system back
panel.
94 Sun Fire V440 Server Parts Installation and Removal Guide • July 2003