Sun Microsystems Sun Fire V440 Parts Installation And Removal Manual page 139

2. Disconnect the five cables from the connector board.
PCI fan tray
cable at P7
Front LED
cable at P15
3. Loosen the Phillips No. 2 captive screw securing the connector board to the
chassis.
4. Pull the connector board toward the front of the system until it disengages from
the SCSI backplane.
5. Lift the connector board out of the system.
Make sure that the connector board clears the two front mounting posts on the
chassis.
What Next
Complete this task:
"How to Install the Connector Board" on page 128
X
Screw
Chapter 6 Servicing Miscellaneous Components
Connector
board power
cable at P6
SCC reader
cable at P19
CPU fan tray
cable at P8
127