How To Remove The Top Cover - Sun Microsystems Sun Fire V440 Parts Installation And Removal Manual

What Next
To power on the system, see:
"How to Power On the System" on page 19

How to Remove the Top Cover

Before You Begin
Complete these tasks:
"How to Power Off the System" on page 23
"How to Slide the System Out of the Cabinet" on page 29
What to Do
1. Open the system doors.
Use the system key to unlock the front doors.
2. Loosen the Phillips No. 2 captive lockdown screw securing the top cover to the
chassis.
The lockdown screw is located on the chassis face above the disk drives.
3. Pull the latches up to release the top cover from the chassis, then lift the cover up
and off the chassis.
What Next
To replace the top cover, see:
"How to Install the Top Cover" on page 35
34 Sun Fire V440 Server Parts Installation and Removal Guide • July 2003