How to Remove the SCSI Data Cable
Before You Begin
Complete these tasks:
"How to Power Off the System" on page 23
"How to Slide the System Out of the Cabinet" on page 29
"How to Avoid Electrostatic Discharge" on page 44
"How to Remove the Top Cover" on page 34
"How to Remove the PCI Fan Tray" on page 67
What to Do
1. Disconnect the P3 cable end at P3 on the motherboard.
Pull the cable end out of its connector.
2. Disconnect the P4 cable end at P4 on the SCSI backplane.
Pull the cable end out of its connector.
150
Sun Fire V440 Server Parts Installation and Removal Guide • July 2003
P4
P4
P3
P3