Sun Microsystems Sun Fire V440 Parts Installation And Removal Manual page 8

How This Book Is Organized
The procedures in this book are organized as follows:
Before You Begin – This section lists the procedures that you must complete before
proceeding to the next section. Complete these prerequisite procedures in the
sequence in which they are printed.
What to Do – This section explains the procedure. Complete the steps in the
sequence in which they are printed, paying special attention to notes and
cautions.
What Next – This section lists the procedures that you must complete to finish the
current procedure or to return the system to operation. Complete these
procedures in the sequence in which they are printed.
This book contains the following chapters:
Chapter 1 illustrates the front panel and back panel features and LED indicators.
Chapter 2 offers procedures for powering on and powering off the system. In
addition, it describes how to prepare the system for service, including the tools
required, and how to avoid electrostatic discharge.
Chapter 3 provides procedures for servicing components on the front panel,
including disk drives and power supplies.
Chapter 4 provides procedures for servicing the system fans.
Chapter 5 contains procedures for servicing the motherboard components,
including installing memory.
Chapter 6 includes procedures for servicing the system configuration card, the
DVD-ROM drive, the SCSI backplane, and the connector board.
Chapter 7 presents procedures for servicing cables, including how to route cables
in the system.
This book also includes the following reference appendixes:
Appendix A is a reference for connector pinouts.
Appendix B lists physical and environmental specifications.
Appendix C is a reference for board connectors.
Appendix D contains an illustrated parts breakdown, as well as a reference for
field-replaceable unit (FRU) numbers.
viii Sun Fire V440 Server Parts Installation and Removal Guide • July 2003