How to Install the System Control
Keyswitch Cable
Before You Begin
Complete this task:
"How to Remove the System Control Keyswitch Cable" on page 142
What to Do
Caution – The system supplies power to the system control keyswitch cable even
when the system is powered off. To avoid personal injury or damage to the system,
you must disconnect the AC power cords before servicing the system control
keyswitch cable.
1. Connect the system control keyswitch cable end to the keyswitch faceplate.
Press the cable end into the keyswitch faceplate.
144
Sun Fire V440 Server Parts Installation and Removal Guide • July 2003