Sun Microsystems Sun Fire V440 Parts Installation And Removal Manual page 86

3. Loosen the Phillips No. 2 captive screw securing the CPU fan tray to the chassis.
4. Disconnect the CPU fan tray cable at P8 on the connector board.
5. Remove the cable assembly from the cable bracket on the side of the SCSI
backplane.
6. Slide the CPU fan tray toward the front of the system, releasing it from the hooks.
7. Pull the CPU fan tray up and out of the system at an angle, lifting the side near
the PCI fan tray first.
What Next
Complete this task:
"How to Install the CPU Fan Tray" on page 75
74 Sun Fire V440 Server Parts Installation and Removal Guide • July 2003
Cable bracket