Sun Microsystems Sun Fire V440 Parts Installation And Removal Manual page 45

3. Tighten the four captive screws that secure the system to the left and right vertical
rails at the front of the cabinet.
Use a Phillips No. 2 screwdriver to tighten the four captive screws, which are in
recessed access holes in the decorative panels affixed to the system's front panel.
4. Connect all external cables that were attached to the back panel of the system.
Examine each cable for information indicating the cable's origin and its terminating
connection.
5. Replace, close, and lock the cabinet doors, as appropriate.
Chapter 2 Preparing to Service the System 33