Sun Microsystems Sun Fire V440 Parts Installation And Removal Manual page 33

Power button
6. Press the Power button that is to the left of the system control keyswitch to power
on the system.
Output is immediately displayed to the system console if diagnostics are enabled at
power-on, and the system console is directed to the serial and network management
ports.
The system can take anywhere from 30 seconds to 20 minutes before video is
displayed on the system monitor or the ok prompt appears on an attached terminal.
This time depends on the system configuration (number of CPUs, memory modules,
PCI cards) and the level of power-on self-test (POST) and OpenBoot™ Diagnostics
tests being performed.
Normal position
Diagnostics position
Chapter 2 Preparing to Service the System 21