How To Remove The Connector Board - Sun Microsystems Sun Fire V440 Parts Installation And Removal Manual

What Next
To reassemble the system, complete these tasks:
"How to Install the System Configuration Card" on page 120
"How to Install the Top Cover" on page 35
"How to Slide the System Into the Cabinet" on page 32
"How to Power On the System" on page 19

How to Remove the Connector Board

Before You Begin
Complete these tasks:
"How to Power Off the System" on page 23
"How to Slide the System Out of the Cabinet" on page 29
"How to Avoid Electrostatic Discharge" on page 44
"How to Remove the Top Cover" on page 34
What to Do
Caution – The system supplies power to the connector board even when the system
is powered off. To avoid personal injury or damage to the system, you must
disconnect the AC power cords before servicing the connector board.
1. Disconnect the AC power cords from the back of the system.
126 Sun Fire V440 Server Parts Installation and Removal Guide • July 2003