Sun Microsystems Sun Fire V440 Parts Installation And Removal Manual page 66

3. To access the ALOM system controller prompt, type the ALOM system controller
escape sequence (#.).
4. Type the following ALOM command:
sc> removefru PS1
where PS1 is the name of the power supply to be removed. The power supplies are
named PS0 and PS1.
The OK-to-Remove LED will light on power supply PS1.
Caution – Do not remove a power supply from a running system until the power
supply OK-to-Remove LED is lit.
5. Physically remove the power supply from the system.
Follow Step 3 and Step 4 of "How to Remove a Power Supply" on page 48.
The system console displays a message confirming the removal of the power supply.
54 Sun Fire V440 Server Parts Installation and Removal Guide • July 2003