Sun Microsystems Sun Fire V440 Parts Installation And Removal Manual page 112

2. Insert the ALOM card into its slot on the motherboard.
a. Insert the faceplate end of the card into the appropriate opening in the system
back panel.
b. Push the card into the connectors on the motherboard.
Apply even pressure along each edge of the card.
3. Secure the ALOM card faceplate to the back panel with the Phillips No. 1 screw.
4. Connect the cables to the faceplace of the ALOM card.
5. Connect the AC power cords to the back of the system.
What Next
To reassemble the system, complete these tasks:
"How to Install the Top Cover" on page 35
"How to Slide the System Into the Cabinet" on page 32
"How to Power On the System" on page 19
100 Sun Fire V440 Server Parts Installation and Removal Guide • July 2003