How To Install The Connector Board Power Cable - Sun Microsystems Sun Fire V440 Parts Installation And Removal Manual

How to Install the Connector Board
Power Cable
Before You Begin
Complete this task:
"How to Remove the Connector Board Power Cable" on page 146
What to Do
Caution – The system supplies power to the connector board power cable even
when the system is powered off. To avoid personal injury or damage to the system,
you must disconnect the AC power cords before servicing the connector board
power cable.
1. Connect the P6 cable end at P6 on the connector board.
2. Connect the P5 cable end at P5 on the motherboard.
148 Sun Fire V440 Server Parts Installation and Removal Guide • July 2003