Sun Microsystems Sun Fire V440 Parts Installation And Removal Manual page 115

3. Disconnect the AC inlet assembly from the back of the chassis.
a. Disconnect the P13 rear LED power cable end from its connector on the CPU
side of the chassis.
Lay the cable out of the way.
b. Loosen the two Phillips No. 2 captive screws securing the AC inlet faceplate to
the back of the chassis.
c. Press on the faceplace of the AC power inlet to dislodge the AC inlet from the
chassis.
d. Disconnect the two reusable tie wraps securing the AC power cords to the CPU
side of the chassis.
e. Lay the AC power inlet on the CPU cage.
Rear LED power cable
AC inlet faceplate
Tie wraps
Chapter 5 Servicing the Motherboard Components 103