Sun Microsystems Sun Fire V440 Parts Installation And Removal Manual page 122

3. Connect the P3 SCSI data cable end at P3 on the motherboard.
4. Connect the P1 DVD-ROM cable end at P1 on the motherboard.
a. Make sure that the ejector levers are rotated up before inserting the cable.
b. Push the cable end into its connector until the ejector levers lie flat.
5. Connect the P5 connector board power cable end at P5 on the motherboard.
110 Sun Fire V440 Server Parts Installation and Removal Guide • July 2003
SCSI data cable
DVD-ROM cable
Connector board
power cable