How To Install The System Configuration Card Reader - Sun Microsystems Sun Fire V440 Parts Installation And Removal Manual

3. Remove the SCC reader from the system.
a. Lift the back corners of the SCC reader until they snap free of the mounting
posts.
b. Lift the front corners of the SCC reader until they snap free of the mounting
posts.
c. Pull the SCC reader toward the back of the system, carefully guiding the Power
button out of the chassis face, and set the SCC reader aside.
What Next
Complete this task:
"How to Install the System Configuration Card Reader" on page 124
How to Install the System Configuration
Card Reader
Before You Begin
Complete this task:
"How to Power On the System" on page 19
What to Do
Caution – The system supplies power to the system configuration card reader even
when the system is powered off. To avoid personal injury or damage to the system,
you must disconnect the AC power cords before servicing the system configuration
card reader.
1. Disconnect the AC power cords from the back of the system.
124 Sun Fire V440 Server Parts Installation and Removal Guide • July 2003