Sun Microsystems Sun Fire V440 Parts Installation And Removal Manual page 117

5. Disconnect the P5 connector board power cable end at P5 on the motherboard.
Press the locking tab on the cable end and pull it out of the connector.
6. Disconnect the P1 DVD-ROM cable end at P1 on the motherboard.
Lift up the connector ejector levers as far as they go to release the DVD-ROM cable
end from the connector, then pull the DVD-ROM cable out of the connector.
7. Disconnect the P3 SCSI data cable end at P3 on the motherboard.
Hold the cable end by the edges and gently rock the cable from side to side as you
pull it out of the connector.
SCSI data cable
DVD-ROM cable
Connector board
power cable
Chapter 5 Servicing the Motherboard Components 105