How To Install The Alom Card - Sun Microsystems Sun Fire V440 Parts Installation And Removal Manual

5. Pull the ALOM card from its slot.
Hold the card by the faceplate and its opposite edge. Pull up while rocking the card
from end to end until it is freed from its slot.
6. Place the ALOM card on an antistatic mat.
What Next
To replace the ALOM card, complete this task:
"How to Install the ALOM Card" on page 99

How to Install the ALOM Card

Before You Begin
Complete this task:
"How to Remove the ALOM Card" on page 97
What to Do
1. Locate the slot for the ALOM system controller card.
Caution – Make sure that the AC power cords are disconnected from the system
before installing the ALOM card.
Note – Make sure that you install the ALOM card into the ALOM slot. Though the
ALOM card may physically fit into a PCI slot, it will not function if installed there.
Chapter 5 Servicing the Motherboard Components 99