Sun Microsystems Sun Fire V440 Parts Installation And Removal Manual page 55

6. Secure the system to the front rails using four M4, M6, or 10-32 screws, depending
on your cabinet, to attach the chassis brackets to the rack.
7. Attach the cable management arm to the system, if applicable.
Route the cables through the cable management arm.
8. Connect all external cables that were attached to the back panel of the system.
Examine each disconnected cable for information indicating the cable's origin and its
terminating connection.
9. Replace, close, and lock the cabinet doors, as appropriate.
Chapter 2 Preparing to Service the System 43