Oil Level Sensor - Honda MBX50 Workshop Manual

SWITCHES

Oil LEVEL SENSOR

INSPECTION
Remove the fuel tank.
Disconnect the oil level sensor coupler and remove
the sensor from the oil tank.
Measure the oil level sensor resistance with empty
float position.
RESISTANCE: G/R to Bk: 5-15 ohm
G to Bk:
Measure the resistance· between the green/red and
the black wire terminals with full float position.
RESISTANCE: G/R to Bk Approximately 340 ohm
Turn the ignition switch ON.
Connect the oil level sensor coupler to the- wire
harness. Move the float from full to empty and
check that the oil warning light comes on.
If the light does not go on, check for blown fuse or
bulb, loose connection or open circuit in the wire
harness. Replace the sensor if all of these para­
meters check out good.
17-5
00
(2) FLOAT
(1) OIL WARNING LIGHT
HONDA
MBX50,MBX80
(1) FLOAT