4. Remove two screws securing the fan to the bracket.
5. Remove the fan.
6. To re-install, follow these steps in reverse order.
Replacing the card cage fan-back (fan #9)
Estimated replacement time: 16 minutes
1. Remove the front top cover (on page 40).
2. Remove the light engine cover (on page 41).
3. Remove two screws securing the fan to the card cage.
4. Disconnect the inline connector.
5. Remove the card cage fan.
6. To re-install, follow these steps in reverse order.
Replacing the card cage intake fans–top (fan #10, 11 and 12)
Estimated replacement time: 4 minutes per fan
1. Remove the front top cover (on page 40).
2. Remove the light engine cover (on page 41).
3. Disconnect the required fan harnesses from the primary EVB board.
4. Disconnect the inline fan connector(s) and release the cables from the routing clip.
5. Remove the four screws for each fan.
6. Remove the fan(s).
Roadie 4K35 and 4K45 Service Manual
020-101694-03 Rev. 1 (01-2016)
Copyright
2016 Christie Digital Systems USA Inc. All rights reserved.
©
Parts and module replacement
50