2. Remove the electronics-side cover.
Removing the card cage
The card cage contains the projector intelligence board, integrated media block, integrated cinema
processor, integrated motor control board, and marriage interlock switch.
1. Disconnect all external card cage connections.
2. Remove the top cover (on page 3).
3. Remove the electronics-side cover (on page 5).
4. Remove the two screws securing the electronics bracket and remove bracket.
Replacing the CP4325-RGB Coupling Elbow Instruction Sheet
020-102890-01 Rev. 1 (07-2018)
Copyright
2018 Christie Digital Systems USA, Inc. All rights reserved.
©
Replacing the CP4325-RGB coupling elbow
6