Replacing The Card Cage Fan Pack (Fans 5, 6, 7, And 8) - Christie CP2208-LP Service Manual

Estimated replacement time: 7 minutes
1. Remove the top skin (on page 32).
2. Remove the high security and light engine covers (on page 40).
3. Remove the four screws securing the top blower assembly.
4. Disconnect the fan harness connection.
5. Remove the three screws securing the light engine air duct.
6. Remove the two screws securing the fan.
7. Remove the fan.
8. To replace the fan, complete these steps in reverse order.
Replacing the card cage fan pack (fans 5, 6, 7,
and 8)
The fan pack is located directly behind the card cage air filter on the front of the projector and consist
of four fans.
CP2208-LP Service Manual
020-102263-01 Rev. 1 (09-2016)
Copyright 2016 Christie Digital Systems USA Inc. All rights reserved.
©
Ventilation and cooling
50