Table of Contents
Advertisement
Notice. If not avoided, the following could result in property damage.
•
Christie products must be installed and serviced by Christie qualified technicians.
•
Do not reuse lens tissues.
•
Always handle optics by their edges.
Recommended service kit
Use the following recommended tools to clean the optics.
•
Powder-free latex gloves
•
Soft camel-hair brush
•
Dust-free blower - air bulb or a canned air duster without additives such as Techspray 1671-
10S Ultra-Pure Duster
•
Lint-free lens tissue, such as Lensx 90 tissue or Newport Optics cleaning tissue
•
Lens cleaning solution and a microfiber cloth (for the lens only)
•
Optical grade cotton swabs with wooden stems
•
A bright, portable illumination device such as an LED flashlight
Cleaning the lens
To avoid the risk of scratching the lens, clean the lens only if absolutely required.
Inspecting the card cage filter
Check the condition of the card cage air filter monthly. Clean or replace the card cage air filter sooner
if you are operating the projector in a dusty or dirty environment.
The filter is located on the left side of the projector behind the air filter cover. Use only high efficiency
Christie approved filters.
CP2308-G User Guide
020-102863-01 Rev. 1 (05-2018)
Copyright
2018 Christie Digital Systems USA, Inc. All rights reserved.
©
Maintaining the projector
87
Advertisement
Table of Contents
