Front cover
The front cover provides access to the lens assembly.
1. Loosen the four screws securing the front cover.
2. Remove the front cover.
3. Replace the front cover, if required.
4. To re-install, follow these steps in reverse order.
Verify the lens boot is properly aligned and sealed against the front cover.
Side-intake cover
The side-intake cover provides access to the radiator, filter, and fans.
1. Loosen the four screws securing the side-intake cover.
Cinema 4K-RGB Service Guide–CP4315-RGB, CP4320-RGB, CP4325-RGB, CP4330-RGB
020-102713-06 Rev. 1 (08-2022)
Copyright
©
2022 Christie Digital Systems USA, Inc. All rights reserved.
If printed, please recycle this document after use.
Projector covers and feet
41