Removing the front cover
The front cover provides access to the lens assembly.
1. Loosen the four screws securing the front cover.
2. Remove the front cover.
3. If required, replace the front cover.
4. To install the front cover, repeat these steps in reverse order.
Check that the lens boot is properly aligned and sealed against the front cover.
Removing the side-intake cover
The side-intake cover provides access to the radiator, filter, and fans.
1. Loosen the four captive screws securing the side-intake cover.
Cinema 4K-RGB Service Guide–CP4315-RGB, CP4320-RGB, CP4325-RGB, CP4330-RGB
020-102713-03 Rev. 1 (11-2019)
Copyright
2019 Christie Digital Systems USA, Inc. All rights reserved.
©
Projector covers and feet
42