3. If required, replace the rear cover.
4. To install the rear cover, repeat these steps in reverse order.
Removing the electronics-side cover
The electronics-side cover provides access to the card cage, rear IOS, and reservoir module.
1. Loosen the four captive screws securing the electronics-side cover.
2. Remove the electronics-side cover.
3. If required, replace the electronics-side cover.
4. To install the electronics-side cover, repeat these steps in reverse order.
Cinema 4K-RGB Service Guide–CP4315-RGB, CP4320-RGB, CP4325-RGB, CP4330-RGB
020-102713-03 Rev. 1 (11-2019)
Copyright
2019 Christie Digital Systems USA, Inc. All rights reserved.
©
Projector covers and feet
41