Fastening The Adapter Cover; Fastening The Cable Holder - Christie LWU421 Setup Manual

LX501/LX601i/LW401/LW551i/LWU421/LWU501i

Fastening the adapter cover

Use the supplied adapter cover to prevent
the USB wireless adapter from coming
off easily. When using the adapter cover,
connect the USB wireless adapter to the
further USB TYPE A port from the LAN
port.
Loosen the screw marked with a
1.
triangle.
Insert the tab of the cover into the hole
2.
at the upper right of the USB TYPE A ports in the
direction of the arrow.
Align the screw holes on the projector and the cover.
3.
Then insert the screw removed from the projector into the hole and tighten
the screw.
WARNING ►Keep small parts away from children and pets. Take care not
to put in the mouth.

Fastening the cable holder

Use the supplied cable holder to prevent
the USB wireless adapter and the HDMI
cables from becoming detached.
When using the cable holder, connect the
USB wireless adapter to the further USB
TYPE A port from the LAN port.
Remove the screw marked with a
1.
triangle and the screw marked with a
diamond.
Open the cable holder clip and then
2.
align the screw holes on the projector
and the holder. Then insert the screw
removed from the projector into the hole
and tighten the screw.
Snap the clip closed to secure the
3.
TM
HDMI cables in place.
WARNING ►Keep small parts away from children and pets. Take care not
to put in the mouth.
Setup Guide
1
1
TM
2, 3
Cable holder
8
Tab
2
3
020-000504-02 Rev. 1 (06-2012)