Touch Panel; Rear Cover - Christie Cinema 4K-RGB Service Manual

3. Disengage the top cover lock pin by pulling on the pin and lift up the top cover to remove it.
4. Replace the top cover, if required.
5. To re-install, follow these steps in reverse order.

Touch panel

The touch panel is a touch-sensitive screen used to control the projector, manage sources, adjust the
display, and view status information.
1. Disconnect all harnesses from the card cage input panel.
2. Loosen the clamp knob.
3. Remove the touch panel from the projector.
4. Replace the touch panel, if required.
5. To re-install, follow these steps in reverse order.

Rear cover

Removing the rear cover provides access to the power supplies and other components allowing
removal of the integrator assembly.
1. Loosen the six screws securing the rear cover.
2. Remove the rear cover.
Cinema 4K-RGB Service Guide–CP4315-RGB, CP4320-RGB, CP4325-RGB, CP4330-RGB
020-102713-06 Rev. 1 (08-2022)
Copyright © 2022 Christie Digital Systems USA, Inc. All rights reserved.
If printed, please recycle this document after use.
Projector covers and feet
39