Table of Contents
Advertisement
20-6 WAN and Dial Backup Setup
Table 20-4 Advanced WAN Port Setup: Call Control Parameters
FIELD
Retry Interval
Enter a number of seconds for the Contivity 221 to wait before
(sec)
trying another call after a call has failed. This applies before a
phone number is blacklisted.
Drop Timeout
Enter a number of seconds for the Contivity 221 to wait before
(sec)
dropping the DTR signal if it does not receive a positive disconnect
confirmation.
Call Back Delay
Enter a number of seconds for the Contivity 221 to wait between
(sec)
dropping a callback request call and dialing the co-responding
callback call.
Remote Node Profile (Backup ISP)
20.6
Enter 2 in Menu 11 Remote Node Setup to open Menu 11.1 Remote Node Profile (Backup ISP)
(shown below) and configure the setup for your Dial Backup port connection. This feature is not
available on all models.
Figure 20-4 Menu 11.1 Remote Node Profile (Backup ISP)
Menu 11.1 - Remote Node Profile (Backup ISP)
Rem Node Name= ?
Active= Yes
Outgoing:
My Login=
My Password= ********
Authen= CHAP/PAP
Pri Phone #= ?
Sec Phone #=
Press ENTER to Confirm or ESC to Cancel:
The following table describes the fields in this screen.
317517-A Rev 00
DESCRIPTION
Edit PPP Options= No
Rem IP Addr= 0.0.0.0
Edit IP= No
Edit Script Options= No
Telco Option:
Allocated Budget(min)= 0
Period(hr)= 0
Nailed-Up Connection= No
Session Options:
Edit Filter Sets= No
Idle Timeout(sec)= 100
DEFAULT
20 seconds
15 seconds
Advertisement
Table of Contents
