Setting A Profibus Address On Im 152-1Dp - Siemens SIMATIC ET 200iSP Operating Instructions Manual

Commissioning guideline

3.9 Setting a PROFIBUS address on IM 152-1DP

3.9 Setting a PROFIBUS address on IM 152-1DP
Requirements
You have selected the PROFIBUS configuration.
Setting the PROFIBUS address
Set the PROFIBUS address on the interface module IM 152-1DP.
Figure 3-7
See also
Configuring PROFIBUS DP address (Page 179)
48
Example of the setting on PROFIBUS address 3
Operating Instructions, 11/2022, A5E00247483-AK
ET 200iSP