Dimensional Drawings - Siemens SIMATIC ET 200iSP Operating Instructions Manual

Reference book "Dezentralisieren mit PROFIBUS-DP"
Technical book
Decentralizing with PROFIBUS
DP
- Installation, configuration and
use of PROFIBUS-DP with SIMAT‐
IC S7 -
Josef Weigmann, Gerhard Kilian
Publicis MCD Verlag, 3rd print‐
ing
SIMATIC Manual Collection - DVD
Designation
SIMATIC Manual Collection
Technical product data - DVD
Designation
Technical product data for
S7‑300, S7‑400 and ET 200
A.2

Dimensional drawings

Introduction
Below you will find the dimension drawings of the most important components for the
ET 200iSP.
ET 200iSP
Operating Instructions, 11/2022, A5E00247483-AK
Article numbers
In bookstores:
ISBN 3895781894
at your Siemens branch:
A19100-L531-B772
Article number
6ES7998-8XC01-8YE2
Article number
6ES7991-0CD01-0YX0
A.2 Dimensional drawings
Contents
Instruction manual for getting started
with PROFIBUS DP and with the imple‐
mentation of automation tasks using
PROFIBUS-DP and SIMATIC S7.
Based on SIMATIC S7, the use of PROFI‐
BUS-DP is demonstrated with many
practical application examples.
Contents
Contains all SIMATIC manuals in elec‐
tronic format
Contents
Contains the following technical prod‐
uct data for CAD/CAE systems:
• Technical data according to ECAD
component standard V1.2
• Graphical data (drawings)
• Circuit-diagram macros
Appendix
425