Siemens SIMATIC ET 200iSP Operating Instructions Manual page 18

Distributed i/o

Hide thumbs Also See for SIMATIC ET 200iSP:

Table of Contents

System planning

1.3 ET 200iSP station on PROFINET IO

Setting up a network based on PROFINET IO

In the following sections, you will find example configurations for setting up a PROFINET IO

• The IO controller is integrated into the CPU of the automation system, e.g. a

SIMATIC S7 410‑5H has two PROFINET IO interfaces.

• The ET 200iSP distributed I/O devices are connected to the CPU of the automation system via

PROFINET IO.

Example configurations:

• Example configuration with a single CPU (Page 19)

• Example configuration with redundant CPU (Page 20)

Table of Contents