Analog Output Module With Hart (4 Ao I Hart) - Siemens SIMATIC ET 200iSP Operating Instructions Manual

A.4.7

Analog output module with HART (4 AO I HART)

Address space of analog output module with HART (4 AO I HART)
Table A-28
PIQ
QB x
QB x+1
QB x+2
QB x+3
QB x+4
QB x+5
QB x+6
QB x+7
Table A-29
PII
IB x
IB x+1
IB x+2
IB x+3:
IB x+4
IB x+5
...
IB x+9
IB x+10
...
IB x+14
IB x+15
...
IB x+19
HART status byte: Status codes used by the PROFIBUS PA profile for ET 200iSP:
• 01001100 (4C
• 00011000 (18
• 00001100 (0C
ET 200iSP
Operating Instructions, 11/2022, A5E00247483-AK
PIQ with analog output module with HART (S7 format)
7 6 5 4 3 2 1
PII for analog output module with HART (IEEE754 floating point format)
7 6 5 4 3 2 1
) uncertain, initial value (before first contact)
H
) bad, no communication (communication error)
H
) bad, device failure (device fault)
H
A.4 Address space of the inputs and outputs
0 Analog value
Output value channel 0
Output value channel 1
Output value channel 2
Output value channel 3
0 Description
IEEE variable 1 in floating
point representation, as
specified for HART
HART status byte for IEEE var‐
iable 1, as specified for HART.
See section "IEEE tags
(Page 396)"
IEEE variable 2 in floating
point representation, as
specified for HART and HART
status byte (for configura‐
tion see IEEE variable 1)
IEEE variable 3 in floating
point representation, as
specified for HART and HART
status byte (for configura‐
tion see IEEE variable 1)
IEEE variable 4 in floating
point representation, as
specified for HART and HART
status byte (for structure see
IEEE variable 1)
Appendix
You can select the number of
IEEE variables in the configu‐
ration.
You can map any IEEE varia‐
ble of a field device into the
PII. See section "IEEE tags
(Page 396)"
441