Siemens SIMATIC ET 200iSP Operating Instructions Manual page 337

Parameters 8 DI NAMUR, configuration "2 Count/ 6 DI NAMUR" and "2 Count/ 6 Control"
In addition to the configuration "8 DI NAMUR", the following parameters can be set for counting:
Table 13-15 Parameters for "2 Count/ 6 DI NAMUR" and "2 Count/ 6 Control"
Parameters
Encoder type counter inputs •
Counter 1 mode
Counter 2 mode
Parameters 8 DI NAMUR, configuration "2 Count/ 6 Control"
In addition to the configuration "8 DI NAMUR", the following parameters can be set for counting:
Table 13-16 Parameters for "2 Count/ 6 Control"
Parameters
Control channel
Parameters 8 DI NAMUR, configuration "2 Trace/ 6 DI NAMUR"
In addition to the configuration "8 DI NAMUR", the following parameters can be set when
measuring frequencies:
Table 13-17 Parameters for "2 Trace/ 6 DI NAMUR"
Parameters
Encoder type frequency in‐
puts
Measuring window (TOR)
ET 200iSP
Operating Instructions, 11/2022, A5E00247483-AK
Range of values
Channel disabled
• NAMUR sensor
• Single contact unconnected
• Standard counting function
• Periodic counting function
• Cascaded counting function
• Standard counting function
• Periodic counting function
Range of values
• Channel disabled
• NAMUR sensor
• Single contact unconnected
Range of values
• Channel disabled
• NAMUR sensor
• Single contact unconnected
• 50 ms
• 200 ms
• 1 s
13.5 Parameters of the digital electronic modules
Default
NAMUR sensor
Standard counting function Channel 0
Standard counting function Channel 1
Default
NAMUR sensor
Default
NAMUR sensor
1 s
Digital electronic modules
Applicability
Channel
Applicability
Channel
Applicability
Channel
Channel
337