General Technical Specifications; Standards And Certifications - Siemens SIMATIC ET 200iSP Operating Instructions Manual

General technical specifications

9.1 General technical specifications
Definition
The general technical specifications contain the standards and test values which the ET 200iSP
distributed I/O device complies with and fulfills or according to which test criteria the ET 200iSP
distributed I/O device has been tested.
9.2

Standards and certifications

CE mark
The ET 200iSP distributed I/O system meets the requirements and protective objectives of the
following EC directives, and satisfies the Harmonized European Standards (EN) for
Programmable Logic Controllers which were published in the official pamphlets of the European
Community:
• 2014/30/EU "Electromagnetic Compatibility" (EMC Directive)
• 2014/34/EU "Equipment and protective systems intended for use in potentially explosive
atmospheres" (Explosion-protection directive)
The EC Declarations of Conformity are available to the responsible authorities at:
Siemens AG
Process Automation
DI PA AE
Östliche Rheinbrückenstr. 50
76181 Karlsruhe, Germany
EMC Directive
SIMATIC products are designed for use in industrial environments.
ET 200iSP
Operating Instructions, 11/2022, A5E00247483-AK
9
239