Profibus Dp - Siemens ULTRAMAT 6 Series Compact Operating Instructions

Connecting
4.2 Electrical connection
Please also observe the following for correct operation:
• Connect the analyzer's enclosure to the equipotential bonding.
• Connect the signal lines to the Sub-D plugs at the rear of the device.
Refer to the ELAN interface description (Order No. C79000-B5200-C176 German, C79000-
B5276-C176 English) for details on the interface cable.
4.2.3

PROFIBUS DP

Figure 4-2
Pin 7 is connected to the data line. No consumers must be connected.
The cable shield must be connected over a larger surface in the plug housing.
Failure to comply with this can result in personal injury or damage to property.
34
5
9
4
8
3
7
2
6
1
PROFIBUS DP connection
CAUTION
Compact Operating Instructions, 01/2024, A5E45779144002-AB
Series 6 and ULTRAMAT 23