Inserting And Labeling The Power Supply, Interface Module, And Electronic Modules; Requirements - Siemens SIMATIC ET 200iSP Operating Instructions Manual

6.5 Inserting and labeling the power supply, interface module, and
electronic modules
6.5.1

Requirements

Properties
• The modules are mounted on the associated terminal modules.
• A labeling strip enables the interface module and the electronic modules to be labeled.
• When an interface or electronic module is plugged in for the first time, the coding element
latches into place on the terminal module. This prevents the insertion of a wrong module.
The interface module and the electronic modules are self-coding.
Requirements
Observe the plugging rules.
Required tools
4.5 mm screwdriver
ET 200iSP
Operating Instructions, 11/2022, A5E00247483-AK

6.5 Inserting and labeling the power supply, interface module, and electronic modules

Wiring
141