Example Configuration With A Single Cpu - Siemens SIMATIC ET 200iSP Operating Instructions Manual

1.3.1

Example configuration with a single CPU

Example
The connection of the I/O device via media redundancy is possible.
Automation system
Plant bus
Configurations
Fieldbus
Distributed I/O
ET 200iSP
Operating Instructions, 11/2022, A5E00247483-AK
CPU 410-5H in 1oo1 mode
1 PN/IO subnet on an internal PN/IO interface of the IO controller (e.g CPU
410-5H: Terminal X5)
Note:
The configurations are not suitable for time stamping with an accuracy of 1 ms.
1 PN/IO subnet on an internal PN/IO interface of the IO controller (e.g CPU
410-5H: Terminal X8)
IO devices with ET 200iSP with one interface module in 1oo1 mode
System planning
1.3 ET 200iSP station on PROFINET IO
19